Wavetek 147 Especificaciones descargar pdf (Pagina 248)

Description and Basic Operation of the SDA-5500 and 5510: Global Configuration

224

Date: Select this option to enter the date using the numeric entry keys. The

date will be displayed in the format you select in the DATE FORMAT setup

menu.

Printer: The Printer option sets the printer interface to the specific type of

printer used. Use the up and down diamond keys to select the desired

printer. The required serial printer configuration is as follows:

• baud rate consistent with SDA-5500 and SDA-5510 (recommend 9600

or 19.2K)

• 8 data bits

• 1 stop bit

• no parity

• flow control - hardware handshaking

A serial to parallel converter (such as the one manufactured by Black Box

Corp.) is required for printing to a parallel printer. The setup is the same as

for the serial printer configuration.

Lines/Page: The number of lines per page (min 30, max 255) can be

specified for text printouts. This determines the number of lines printed

before a form feed command is sent. If no form feeds are desired, enter

zero.

Baud Rate: The baud rate is used when establishing communications

between the SDA-5500 or SDA-5510 and another device. The baud rates

available are 1200, 2400, 4800, 9600, and 19.2k. Use the up and down

diamond keys to set the baud rate.

Beeps: The SDA headend units produce beeps to alert you of certain

operating conditions. Use the diamond keys to turn beeps on or off as

desired.

Diagnostics: Select Diagnostics and press the Enter key to enter the

diagnostic mode. If this option does not appear on the SETUP screen, press

the down arrow until it scrolls onto the list.

From the Diagnostics mode you can perform the following functions:

Default to Factory Settings: When this item is selected and you press the

Enter key, the unit will automatically reset all parameters to the factory

default values.

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 409 410

Sin comentarios

Wavetek 147 Especificaciones Pagina 248