Wavetek 3SR Especificaciones descargar pdf (Pagina 35)

4-12

Build Channel Plan

Press the ENTER key to begin the Build Channel Plan sequence.

This sequence allows the user to create a channel plan by "learning"

the channels on a cable system.

NOTE: Ensure that the Stealth 3SR is connected to the cable system.

Step 1: Enter a name for the new channel plan that will be built.

Use the alphanumeric keypad to enter a channel plan name. Press

the OK soft key when completed.

Step 2: Select a fixed channel plan to use for building the new plan.

Use the UP and DOWN arrow keys to select a fixed channel plan to

build the new plan from. Press the OK soft key when completed.

Step 3: Enter the frequency at which to stop searching for channels.

Press the ENTER key followed by the OK soft key to set the

stop frequency.

The 3SR Receiver will sequence through all channels in the selected

fixed plan until the stop frequency is reached. This operation can be

terminated by pressing the STOP soft key. When completed, indi-

vidual channels contained in the newly built plan can be edited.

NOTE: Some channel plans have interlaced channels. To prevent

interference, delete interlaced channels prior to building sweep

points.

4.3.4 How To Edit Channel Parameters

This setup feature allows the user to edit existing channel param-

eters. Press the ENTER key to initiate channel parameter editing.

A list of all channels contained within the active plan is presented.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 124 125

Sin comentarios

Wavetek 3SR Especificaciones Pagina 35